Mixed results.

My attempts at making 3mm figures and vehicles are going really well, with one huge problem.  The first vehicles have been cast and painted and look better than I'd hoped.  The first figure is sitting in it's mould waiting for it to harden so I can open it and cast from it.  I have high hopes for how he's going to turn out too.

But...

They won't go together.  My vehicles would be fine with normal 3mm figures.  But cuties have extra bulk and outsized helmets.  So a 3mm egg gives a figure that would go better with 6mm or even 10mm vehicles.  To go with a 3mm vehicle I need to start with an egg that's under 2mm, so the 3mm vehicles I've made will either be for a vehicle only war or I will buy some proper 3mm figures to go with them.  If the infantryman I made turns out to my liking then I'll make some larger vehicles to go with him.

Anyway, pictures of the tank and armed hovercraft I made. :)

Clangers

Yep, Clangers.  With guns.  To fight Daleks.

The Clangers are going to help the Zzlugg fight their Dalek oppressors.

I'm planning for a force of fourteen Clangers and a support droid, still to be made.

Four are from moulds, the fifth is a one off model.

This is the one off, Captain BayKah, one eyed one eared war hero.

Clanger with blast pistol.

Clanger with blast rifle.

Blast rifle, pose two.

And finally a Clanger with a heavy blaster.

These turned out better than I could have hoped, maybe I'm getting better at this? :)

The Butterfly Effect

I seem to find it hard to stick to one project, some new idea for what I could do keeps popping into my head and I just need to see if it's possible.  The Wargames Website is particularly guilty of inspiring new ideas.  This isn't necessarily a bad thing, but I may just have taken a step too far...

On the left is one of my 15mm figures, on the right a roughly 3mm egg which is possibly going to become a near future infantryman.  And I'm going to do vehicles to go with him.  Or so I hope.

For the record, here's what I'm actively working on:

19th Century imaginations

Ancient Sumerians

Zulu War

Colonial Sudan

Medieval

Zombies

Sci-fi

Prehistoric

And now 3mm Near Future

On the bright side, I'm never bored. :)

Some real figures I painted

Several years ago I made my Mum a Rorkes Drift diorama for a birthday present - Zulu is one of her favourite films.  I borrowed it off her today to take some pictures to show that I can paint real wargames figures when I want to. :p

The figures are 10mm, from Pendraken if I remember correctly.

I hadn't seen it for a few years, I'm quite impressed with how good it still looks to me. :)

More sci-fi stuff

I completed more terrain tiles, an alien building and the first of my Zzlugg, an alien race suffering under Dalek occupation.

I'll only use four terrain tiles for a game, but it's best to have more to allow for variety.

I tried to go for something different with the building shape.

The cylinder sticking up from the roof is some kind of electronics thing, not there just so I have some way of lifting the roof off, honest. :p

A look inside.  I might add some loose furniture, but it's not a priority for now.

The Zzlugg for the most part do not fight the Daleks, but what is that behind the shrooms in the top left of the picture?

A member of the resistance!

Landing pad and scout craft

I completed the landing pad tile and something to go on it, the scout craft is really just scenery as I have no plans of having airpower in the game.  

The landing pad is a section of foam tile turned upside down, a hole the same size was cut out of the tile used for the base and the upside down section glued in place.

The scout craft is made from a sweetener container, the cybermen are to show the scale.  And because I really like my cybermen figures. :)

Second attempt at an alien planet

Here's a step by step look at how I made my alien planet tile.

First I cut a 27.5cm sqare from 6mm MDF.

Then I cut the foam floor tile into four pieces.  These don't have to be the same size, what's important is that the cuts cross at right angles.

I then reassembled the foam tile with the teeth in the middle and glued it onto the MDF square.

A second MDF square was placed on top to keep it flat and then this was weighted down with books and left to dry overnight.

A section was cut from another foam tile and glued to the corner.

And then a smaller section cut and glued on top.  I made both sides of each level the same length to allow these to join up with other hill sections.

I then covered over the teeth of the foam mat with filler and gouged out some rocky depressions in the bottom right corner.  

A couple of coats of paint cover up the tile colour.

Sand was then glued on, leaving the parts I want to appear as rocks clear.

Another coat of paint, left overnight to dry because the sand really slows down the drying time.

Drybrushing over the sand to bring out the texture.

Base coat for the rocky bits.

Then they are drybrushed too, and the tile is complete. 

Add some alien plants and a few Daleks and it's ready to use. :)